|
Nwmo | I currently run our 1990ccs through the vt. I use steering and coverage logging on the ag leader screen. Switching tabs isn't that big of a deal. You can run the clutches manually. If I were you I would get a clutch control module. That way you could put a implement switch on it and run coverage logging and just keep the drill vt screen up and not have to worry about the ag leader screen. The steering engage button would still be in the corner and accessible from the vt screen. If you do put a seed tube monitor ide like to know how it works.
Devin | |
|
JD 1990 CCS on Ag leader
