|
Missouri | I did it on a 2011 or 2012 model i dont remember which for sure. if you just want the seed monitor you can get a Seed Tube monitor module and it will work but you have to get a seed tube harness to hook to the sensors on the drill from some other source. I think i got mine through precision planting. The only stipulation it you can only do up to 32 sensors i think. The one i did had only 24 rows cause it was a 30 ft drill on 15 in. We also hooked up the two clutches to a clutch control module so autoswath would work. I dont know that it is approved by ag leader but it has worked so far for the last 2-3 years. Kind of expensive versus going the iso route but at that time the iso was not an option for us so we did it the other way. | |
|
JD 1990 CCS on Ag leader
