|
Central Kansas | This is getting frustrating as in my post 6 weeks ago,I thought that I understood that the 1000rpm is ALWAYS available and by pushing in the pin, that shifts something to create the 540 speed. As it is right now, I have 540 and absolutely nothing with the pin not compressed.
I pulled the pin all of the way out and rotated the contraption that the bolt on shaft attaches to, thinking I could get it to "fall into place" and thus have 1000rpm's but no luck. I am really at a lost on this one! Tomorrow, I will put the 540 shaft back on and observe whether it might be turning at a 1000rpms............even though the pin is compressed.
Any more help would be appreciated....Thanks
Edited by trakman 4/8/2008 22:38
| |
|
Help me understand the 4010 PTO
