|
East Central, Nebraska | I have an integra that I move around all over, it controls my spreader drives and the ontrac in the winter, my planter drives and clutches in the spring, it controls my isobus john deere baler and rate and section control on my sprayer all summer, and my yield monitor and ontrac in the fall in my combine. I try to get all the bang I can out of my precision bucks.
does your outback control any particular type of valves? agleader seems to control a few different kinds of valves and rate controllers. I tied mine into a raven this year. it didn't cost all that much. and when you say boom control do you mean section control or height control. I am not very familiar with outback.
and about the camera you mentioned, I run a camera on the back of my spreader and I like how the trimble 750 display puts the picture in the back ground, since I am just using it (the fmx750) to feed my ontrac and integra gps it works very well. the agleader display that I have (integra) will let you use cameras also but I have never done it.
Edited by caseihfarmer 12/13/2013 20:48
| |
|
Ontrac2 vs ezpilot?
