Viewing a thread - Ag leader in JD tractors

Forums | Classifieds (142) | Skins | Language

You are logged in as a guest. ( logon | register )

Ag leader in JD tractors	View previous thread :: View next thread
Forums List -> Precision Talk	Message format

tedbear

Posted 12/7/2013 16:59 (#3499236 - in reply to #3498141)
Subject: Pics of Integra/Geosteer in 8310R

Near Intersection of I-35 & I-90 Southern Mn.

Here are some pictures of my tractor. The first is of the Integra mounted in the upper right corner. The second shows the bracket with the Ram Mount. Others show the CAN switchbox, Geosteer ECU mounted on the floor, the right rear corner and the CAN connection. This connector is just a dummy and the real one is hidden below the trim piece. Otherwise the cable sticks up and is in the way of things.

By using the CAN switchbox it is not necessary to have an Auxiliary Input module as it is built into the switchbox. Note it was possible to hide several of the wires under the trim by the right window. The large Power/CAN connector goes through the back of the cab to the outside world.

The Geosteer ECU is mounted on a plate bolted to the floor. This is to the right of the seat on the floor directly below the Command Arm.

Edited by tedbear 12/7/2013 17:15