|
| Two options here.
1) Either put a deere EH valve, and steering controller on.
2) Put a deere ATU on.
Going the integrated route is obviously more money up front. You're looking at $5,142.50 in the steering kit alone, plus some possible other parts depending on your VIN of machine. Plus roughly $2,000 of labor. Plus cost in entire cab harness roughly $1,200.
ATU route, much less cost. $2,000 for the ATU, then again roughly $1,200 in cab harness kit.
| |
|
Agleader / John Deere Integrated Autosteer
