|
| All of these directions are for up to and including V7.1. I do NOT know if they changed any of the little details on V7.3.
I'll attach my directions, feel free to use, critique, and ask questions. I will attach Boundary directions, Waterway directions, and a document explaining why I use a four wheeler to with a pipe and chain attached to make my boundaries.
This summer I bought a 6x6, so I need to set that up for boundaries, but the principle will be the same. Hopefully they will be of some help.
I am not sure what happens when you shift the infill AB, as far as it still being able to respect the interior boundary when approaching the Headlands. I know that if you make another AB in the field, it will not respect the interior Headland boundary. Only the AB made with the Headland does.
For you wanting to strip till, SKIPPING the AB will keep the boundary as you want it, but I am not sure how a SHIFT affects it. You will have to try it.
Good luck.
Attachments
----------------
 To do boundaries.docx (18KB - 402 downloads)
Waterways.docx (13KB - 226 downloads)
My Chain Reasoning.docx (13KB - 271 downloads)
| |
|
headland pattern with FMX
