|
Eastern Ontario | At the advise of my dealer I used large electrical boxes to mount all of my modules in. I picked up some used ones, I think they are 16x24" to mount 2 or 3 modules in. What worked best was to mount the box vertical with the modules on the back wall, then put a 2" hole in the bottom for the wires. I uses a rubber grommet that holds a clearance light in to keep them from rubbing. This allows some airflow to keep them cool and allows any moisture to dry out. I also put 1/4" drain holes just in case water got in. I can grab a picture some day if you want. | |
|
Ag leader edge
