|
| The serial port is on the back of the display. You'd want to hit the GPS button on the screen (one with the 5 vertical bars), then you'll go to the button that says NMEA on the right and enter that screen. If the Hemisphere receiver is an A220 or A320 on that tractor, you'll have the option to set the NMEA messages for either it or the S3 on the upper left of the screen - choose S3 and enter settings from above. If it's the standard, smaller hgps antenna that came with the Outback, you'll just enter your settings without having to choose the source. Feel free to email me if You're unsure | |
|
How to output NEMA from an Outback Hemisphere
