|
East Central Ia | I have done this for 2 years with a DB60 and MX305. The 2600 is getting taken out as there are several issues that make a red tractor pulling a green planter a pain in the butt.
You can configure the NEMA out from the Nav controller to meet Deeres needs. Our problem has been that the 2600 randomly switches whether the implement is pushed or pulled. Deere says its because its a non deere tractor so the 2600 cant talk to the transmission controller to know what gear its in... 2hy this matters continues to baffle me. But it absolutely reeks havoc on the row shutoffs and caused us A LOT OF FRUSTRATION this year as all those messed up spots that got double planted went down flat.
Its one thing to not have it set right... its entirely something else to have the monitor randomly change itself!
You also have to manually calibrate the radar cal number I the 2600/2630 as the Case radar will be off more then it will allow to calibrate properly. And for some reason Deere will not use GPS speed so you have to use radar.
 (2013-05-15 22.36.04.jpg)
 (2013-05-15 22.36.11.jpg)
 (2013-05-15 22.35.57.jpg)
Attachments
----------------
 2013-05-15 22.36.04.jpg (36KB - 437 downloads)
2013-05-15 22.36.11.jpg (25KB - 427 downloads)
2013-05-15 22.35.57.jpg (37KB - 409 downloads)
| |
|
Case tractor with deere planter?
