PA... close to the Plain Community | +1
another point being that if you ever move the T2 box from an EZ Steer or the NAV II controller from an AutoPilot system... remember that they must be SECURELY mounted to the cab and have their orientation accounted for in the EZ Guide 500.
General rule of thumb, just because you can physically mount it in a vehicle, doesn't mean there is a profile available in the software! you had mentioned using a sprayer as a starting point for your combine. That mentality might cause headaches in some areas. They steer differently, they behave differently, they are different hydraulically.. etc.
|
Moving EZ500 and T2 between machines?
