|
| First of all, save your current configuration, so you don't lose all the settings. Settings - system - advanced - save/load configurations.
Then go into Settings, Implement, Initial Setup. Under the controller options, select None. Keep pressing the tick or arrow to get out of that menu. (Don't press the red x, or it won't save).
Now you can also adjust your implement width on the way in, to open a field, where you normally do it. Everything else should be back to normal. After you have set up your main implement, you can also save a config for this setup as well. You can then go into save/ load configurations to select between FIQ and Normal. | |
|