SWMN | keyser_soze - 11/1/2013 11:10
I don't think that the fact that the Trimble unlock is in your machine in addition to the Ag Leader one has any bearing on your problem.
Question... are you making sure that you're holding down the momentary switch for approx. 1/2 of a second?
More often than not.... this is the issue I've had with the tractor not wanting to engage. I have several using GeoSteer's hooked into the JD 9 pin plug.
It is could be a bad switch. If you're certain you are properly holding down the switch to engage it, I would likely try and replace it.
I have a 2012 Rt running on autopilot or can and the switch has always worked and it does not have to be held for a 1/2 second like the old conventional autopilots. Will engage and dissingage if a quick push of the button. |
Agleader Insight
