|
Alta, Iowa | The harness it ties to should be part of the main outside auto guidance harness. I don't remember if there is connector between the axle and the round metal connector that come in under the back of the cab.
Pin 3 is ground, pin 11 is signal back from the sensor, and pin 15 should be 5V signal to the sensor. This is at the round metal connector under the cab behind the controllers.
 (Image.do.jpg)
Attachments
----------------
 Image.do.jpg (82KB - 35 downloads)
| |
|
T8.360 Wheel Angle Sensor problem with Paradyme, Torn?
