|
| I had that same problem with a 2588 last year, if I remember correctly it engaged when it I lowered the head to cut height. I ended up shutting the accuguide off in the pro 600 in corn because it was such a pain when it happens. But it does reset itself every time you shut off the separator so you have to shut off every time. A pretty good tech was out twice and found no way to eliminate this problem except shutting off in pro 600. The accuguide had been installed on the machine the previous summer and was not a plug and play machine. | |
|
Accuguide in 2388, how do I keep it from auto engaging?
