Near Intersection of I-35 & I-90 Southern Mn. | The Integra will behave as you have hoped. Autoswath will continue to control the row units while the implement switch will start/stop the hydraulic drive(s).
Normally the planter is dropped in early which gives the drives time to get up to speed so that when the clutches engage the population is correct. Backing into a corner and then taking off can have some delay. This can be minimized by carefully setting the PWM parameters so that the drives are just on the edge of turning when in the stopped position. Then the "ramp up" time is minimized so that the seed flow starts as quickly as possible. |
AL controlling electric clutches and hyd drives
