|
| To start with I'd recommend you don't even consider an 1800 display. See if you can find a good 2600 used display, but be careful here because the touch screen's are notorious for going bad so I wouldn't buy one without personally powering it up and making sure it functions fine. 90% of time the right side of the screen gets screwy, sometimes the left though. If you can't find a good one, step up to the 2630, in the long run this will be your best bet anyways. ISO compatible, internal hard drive, usb ports so you don't have to screw with the data card of the 2600. Next, you'll need a receiver. SF3000 is your best bet, a lot better than an iTC. You'll more than likely need an AutoTrac activation as well. Doubtful a used 2600 will come with one on it. Biggest question is, is this tractor "GreenStar Ready" if not you will need either a cab harness or universal GreenStar harness. | |
|
JD 9200 with ATU
