|
Western New York | The 1500 might be running too fast of a baud for the UD+ as well. There won't be any way for it to "auto config" as it is an RS232 connection. I have done this on an older machine, I had to reconfigure the baud rates on the 1500 to match the speed of the display which is un-configurable. I think you are looking for 9600 baud, at 1 hz. you might be able to squeak 5hz out of it but you'll have to "play" with it a bit. What did the 1500 come out of? This particular customer that I did this for used the 1500 to run direct command on an integra, and then wanted to map with it on a UDI+ and I had to use ag-leaders software to reconfig the receiver. The good thing is that the 4002675 cable that you have will jack right into you computer and aid you in reconfiguring the 1500. Good luck! | |
|
ag leader 1500 to UD Plus??
