Viewing a thread - Using X30 to access Implement ISO on MF 8600

Forums | Classifieds (61) | Skins | Language

You are logged in as a guest. ( logon | register )

Using X30 to access Implement ISO on MF 8600	View previous thread :: View next thread
Forums List -> Machinery Talk	Message format

JRM

Posted 10/6/2013 10:33 (#3368627 - in reply to #3368506)
Subject: Re: Using X30 to access Implement ISO on MF 8600

If you are running AG3000 yes, you would just have to assign it to the x30 monitor. If you are running a system 350 you would need a different harness. It takes the same harness you would use for planter control with the x30.

Edited by JRM 10/6/2013 18:42

Using X30 to access Implement ISO on MF 8600 - snowcone : 10/6/2013 09:21
- Re: Using X30 to access Implement ISO on MF 8600 - JRM : 10/6/2013 10:33
- Re: Using X30 to access Implement ISO on MF 8600 - snowcone : 10/6/2013 18:02
- Re: Using X30 to access Implement ISO on MF 8600 - JRM : 10/6/2013 18:36
- Re: Using X30 to access Implement ISO on MF 8600 - snowcone : 10/6/2013 20:22
- Re: Using X30 to access Implement ISO on MF 8600 - JRM : 10/6/2013 20:50

Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)