|
Rivers, MB | I believe there should be a silver colored box (hyd unit) under the cab close to the steering motor thats connected to the steering column if its autotrac ready. If its not, an ATU will work fine.
You will need an adaptor harness to hook up the GS2 2600 to the harness in the RHS corner post of your combine.
When setting up your screens in the GS2, one will need to the original GS display. You will be emulating the GS original on your GS2. Which means that some of your settings need to be entered in your original GS screen on the GS2 first. Its a bit of a pain but it works well.
We are doing exactly what you're wanting to do on a 9860 and 9750 with ATU's in both. | |
|