|
Central NE | Updated the firmware to 4.5 on the Integra and see there is a new headland option under the borders tab. I enable it and set my measurements up for what I wanted.
It has a fillbox on how long to sound the alarm. I left it at the default of 10 secs.
Now I get a pretty grey line inside of the black border. When I get to the headland warning distance (150ft), a distance counter shows up under the Pass number under the built-in lightbar. It counts down fine, but there is no audible alarm. I have the volume set at 40%, which I can hear the auto steer engage and disengage beep just fine. I really thought the audible warning would be the same unadjustable, scare you out of the seat as the operator presence alarm.
Anyone getting an audible alarm? Is there somewhere to adjust the volume up? Or is it bug in the new firware.
Side note... Ontrac2+/Geosteer worked great today. Didn't lose satellite signal once. Hope it stays that way for planting season.
Be Safe
Gayle | |
|
AgLeader 4.5 Integra and new headland option
