|
Sask | If everything is hooked up properly, press the icon on the lower right corner of the screen. Then the GreenStar icon, then Mapping at the top. That should get you the map screen. Next, Map Settings at the bottom and set Foreground to yield or moisture and press Accept. Don't check GPS Accuracy. Back at the map screen, press Edit on the left side. Select high and low yield or moisture numbers. Don't select Zero for the low, or you'll only have 4 instead of 5 colors. You can switch maps and set separate numbers for yield and moisture You should be ready to go. The box on the bottom of the screen with a multi-colored square and a blue square flips between colored which shows yield difference and solid blue which just shows coverage. The box at the bottom with the little grid flips between three views of the field, overhead with north always up, overhead with the combine alway going up, and perspective.
Edited by QuAppelle 9/25/2013 22:17
| |
|