|
Arkansas | Be happy it will tilt at all. We have one that we've been dealing with for a month now that will not tilt. Reloaded software. Did header calibrations. Checked our settings in the toolbox>head1 and head 2. The only way we can get it to tilt it to hook the reel fore/aft wires to the tilt valve and use the fore/aft buttons on the multifunction handle. That made us think it was in the valve, but you can manually detent the tilt valve and it will tilt. So that made us think something had to be bad in the wiring, but everything checks out. We're completely lost. This is on a NH CR9070 though. | |
|