KMech - 9/18/2013 20:54

Has anyone moved an Ag Leader CAN-based yield system from a 9x10 combine to a 9x60 combine and care to share their insights on it?

------Yes lots and lots of times. Literally dozens of times.



The rest of the plan is to order the necessary hardware to complete the flow sensor installation, order parts as necessary to move/adapt the EMU, and modify cabling as necessary to reuse as much of the existing cabling. I have the capability and materials necessary to fabricate cables using weatherpack and Deutsch terminals, so where possible, the 9x10 kit cables will get extended as necessary rather than ordering replacement.

--- Please do not extend or modify older cables. It is worth the money to start with all new ones. All you are doing is introducing more possibilities for problems. It may seem easier and better to modify, but trust me its really not worth it.

You will need an EMU installation kit, a new backplate to fit the 60 series combine, and most likely a new electrical cover.


The 9x10 EMU has a different hole and bolt pattern than the 9x60 EMU. This 9560 machine already has holes to fit the 9x60 EMU, so simply cutting the elevator to match the EMU from the 9410 is not an option. Does anyone have an idea that does not require total EMU replacement?

---See above, a new backplate is what you need.