|
| Ok Trimble guys. I have a fmx hooked up to a raven 660 for manure. Everything is talking good but the fmx seems to have a rate limit of 999.9 gpa. I can enter 12000 but in the communication strings it is only sending out 999.9 until I enter a rate less than that. then it is fine. Now what I am wondering is can you change this without having to change the meter cal to 1000 on my Krone or am I just sol. It will record rates higher but for variable rate control I need to be in the 10- 12000 range (dairy). I was hoping that I could get the fmx to put in my rates as the Raven is only capable of 9999.9 without changing meter cal to 100. Any help would be great.
Edited by fourcubs 9/19/2013 11:09
| |
|