|
| I've also got an Fmx with Field IQ, which freezes up when leaving the screens to adjust the valve gain. It is only running 1 RSCM module and Master Switchbox, with the full harness solution, to run a Raven Anhydrous system. We've had a few problems fine tuning this system to hold a consistent rate, which flares up again, every time a different rate is applied. We've swapped screens, modules, terminators, etc. I've got lots of similar systems running sprayers, with no problems. This sounds like a similar problem to yours. It sure would be nice to hear from other people who have come across this & may have a couple of suggestions. | |
|
Solution to one, and maybe two Fmx problems
