AgTalk Home
AgTalk Home
Search Forums | Classifieds (72) | Skins | Language
You are logged in as a guest. ( logon | register )

How slow with ontrac 2 and wass
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
 
haselmanag
Posted 9/17/2013 07:48 (#3332722 - in reply to #3332674)
Subject: RE: How slow with ontrac 2 and wass


NW Ohio
With ontrac 2 systems you must be traveling 1.5 or greater in order to engage then can back it down to 1 or slower if needed. I have a couple guys that harvest tomatoes in that speed range with mixed results with the ontrac. Some days works great other not so well a lot depends on ground conditions to smeery and to wet and slopes of hills that they work on day to day. They work but I do not recommend them for speeds below 2 mph. They need a WAS at those speeds, then they would work great, but that is not an option at this point. You really need to go integrated with speeds that slow if you want satisfactory results. In a dragline setup if you can travel close to that 1.5 range it should work ok but not great there will be some overlap areas.
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)