|
Cedar Rapids, Iowa | I have always configured our 262 using Ag Remote on a computer. If the unit is unlocked for RTK, Ag Remote will let you configure the RTK settings.
The 262 needs RTK correction data in the CMR+ data format, and it needs dual-frequency (L1+L2) correction data. Any base station that can provide that data will work. The receiver doesn't care how you transport the data from the base to the rover, it just wants to get correction data. You can use conventional radios or some cellular device. This largely depends on how your RTK base station is transmitting.
I believe the Outback Baseline HD is a single-frequency base station, so not good enough for what you need.
-Lance
| |
|
Trimble 262 Unlock RTK
