Posted 9/8/2013 09:44 (#3315152 - in reply to #3315098) Subject: Re: Will JD 2630 o 2600 display and antenna work on other brands of equipment
NESD
The Deere Auto Trac Controller kit has a steering angle sensor that is installed at the pivot, I installed 8 of these kits last spring with very good results, very little if any of the "S"ing that other have seen, the first thing I would do after calibrating was to go into the valve cal readings and lower the hi limit cal number by 20, so if it calibrated at 85 lower it to 65, this takes a lot of the jerkiness out of the steering, then play with the advanced settings from there..
Will JD 2630 o 2600 display and antenna work on other brands of equipment
