AgTalk Home
AgTalk Home
Search Forums | Classifieds (7) | Skins | Language
You are logged in as a guest. ( logon | register )

Programming "swath width" into Ag Leader Integra
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
 
4WD
Posted 9/1/2013 18:37 (#3302043 - in reply to #3301971)
Subject: Re: Programming "swath width" into Ag Leader Integra


Between Omaha and Des Moines, 7 miles South of I80

thanks for the reply.


Did have
37 nozzles (one in the very center) Still on 38" corn rows and 19" soybeans, here. {Did plant a little 19" corn (2 passes) just for a test (4 different populations, in those 2 passes)}

Sprayer is X-boom, and I put each boom, on its only hydraulic control, for lifting over terraces. Pump will run off Power Beyond circuit.


I've already modified(and lenghten) the "wings" to where all but one nozzle will fold up, before the break-a-way joints = will work better folded, "inside" the field.(easily covering two planter passes

Wings down, for the headland passes only, used on the perimeter. (Actually have 39 nozzles, total, currently = it will keep tractor off of guess rows, driving the headland/endrow perimeter)



This year was all no-till, and probably next year too. (Yes, I hope the bean stubble rows, will help, BUT when the NH3 applicator goes at a slight angle, I've been confused before, if the sunlight is wrong.= before any GPS)    

    

Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)