|
Madision County, IL | Did you cycle power to see if the issue goes away?
The error message usually indicates the systems sees a GPS position shift that is out of tolerance and would cause a dramatic steering shift if the system didn't disengage.
This type of error can be caused by a position change that comes from the actual gps. It can also be caused by the ecu electronics.
Troubleshoot by doing the follow when error is happening frequently:
Stop the machine and watch the lightbar for position shifts. After monitoring for a while and getting an idea of how the system is behaving, switch to manual guidance (this eliminates ecu electronics from information being displayed on the lightbar). If the problem goes away after switching to manual guidance, you have an ecu issue. If it doesn't, your problem is probably the GPS.
God luck!!!!!
Jay | |
|
Ontrac2 Issue
