|
| A series Condors (A40 & A75) just used the Raven 460 Console and the G series used the SCS5000, which was CAN Based. Not sure about AgLeader, but Trimbles Ez-Boom just plugged straight into the 460 connector, but you had to just use the switches on the Ez-Boom controller. There is a pretty simple harness I used to make up for the G series to do the same, until Trimble came out with a proper Field IQ kit for both the A & G Series. This kit tapped into all the original cab switches. Surely AgLeader would have a similar kit. The new GC Condors are Can Bus, but use a totally different schematic with the new Cabs. | |
|
2009 Miller Condor A75
