Missouri | scarecrow - 8/26/2013 05:02
Not sure for S series, but if the sensor collar is the same as a 9X00 through 9X70, buy another collar and drill out the threads. Then replace the "dummie" half of the sensor with it. This tells shaft speed sensor its running twice as fast.
I was thinking something like that, but without having the sensor part in front of me, I didn't know what/if modifications would be necessary. It is possible that may be the only choice. If the display will not allow pulses per revolution to be set to a number below "1", it would be necessary to change the actual pulse count instead of the setting in the display. |