|
Missouri | My experience with 2630's is limited, and I have no first hand experience with them in a yield monitoring capacity, so I cannot say much.
What I do know is that on the S-Series machines, they use the same grain flow sensor, and moisture sensor, as Ag Leader. If you have a yield monitor equipped S-series, you just unplug those components from the factory harness, and plug them into the Ag Leader harness.
I may have that backwards. Technically, it's the Ag Leader system plugging into the Deere components (moisture sensor and grain flow sensor), however the design of those parts is so identical (flow sensor is exactly identical, moisture sensor is *highly* similar) that I think Deere is either getting them from Ag Leader, or from the same source as Ag Leader. | |
|