|
| That may work better, and I would give it a try if you are dead set against the venturi style. Just be aware that you may end up with chemical back in the tank and you should check for it. I know two guys, two differnt spray trailers, went and looked at them saw there cone was on the suction side of the pump, had them move it to the pressure side with a ventrui and there was no more problem. The thing with the venturi style is they create much more suction than a cone on the suction side. YOu can even suck powdered chemical through them, that is why if you look at any sprayer that is on the market today, the cone eductor is always on the pressure side, it just plain works better. | |
|
How to plumb a chemical inductor
