AgTalk Home
AgTalk Home
Search Forums | Classifieds | Skins | Language
You are logged in as a guest. ( logon | register )

How to plumb a chemical inductor
View previous thread :: View next thread
   Forums List -> Machinery TalkMessage format
 
ndarbuckle
Posted 3/7/2008 10:05 (#328074 - in reply to #327318)
Subject: RE: How to plumb a chemical inductor



Just to make you aware of one problem with the Chemcial cone on the suction side, you will end up with chemical back in yoour clean water tanks. If that is not a problem for you then you should be ok. We put them on the pressure side of the pump with the ventri, then you never have to worry about contaminating your water supply. In my opinion the only place the chemical cone should go is on the pressure side of the pump. It cost more, but then having contaminated water can cost alot more.

Edited by ndarbuckle 3/7/2008 10:07
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)