AgTalk Home
AgTalk Home
Search Forums | Classifieds (45) | Skins | Language
You are logged in as a guest. ( logon | register )

Case 930, 830, 730 tractors?
View previous thread :: View next thread
   Forums List -> Machinery TalkMessage format
 
Bill Moyer
Posted 8/18/2013 19:14 (#3274676 - in reply to #3273083)
Subject: Re: Case 930, 830, 730 tractors?



Coldwater, Michigan
We had a couple 830 Cases, then a CK 830. Actually liked the non CK 830's better, they were a better balanced Tractor to handle. The CK 830 was however easier (Much easier) to get on to operate. The CK 930 and 1030' were a nicer tractor balance wise than the CK 830. You set in a different position on the 930 and 1030 than you did a 830. If I remember the CK 830' you sat on the rear axle, the CK 930's and 1030's you set just forward of the REAR axle. That seemed to give it a feel that you were a part of the tractor where with the CK 830 it seemed you were a part that was just stuck onto the top of the platform.

The Cases would lug like 90 compared to an IH or JD of the time, but the JD were a nicer tractor to drive. We were IH people (3 M's and an H) and were looking to upgrade probably to a 706. Case dealer somehow talked dad into demoing a 64 830 diesel Case-o-Matic (non CK at that time). The 830 with 5-16 semi mounted ran over the 706 5-16 semi mounted that couple weeks. 706 was supposed to be a bigger tractor by about 10 HP than the 830, but the heavy clay soil pulling just killed the 706, couldn't reach for the Torque fast enough. When we took the tractors back to the dealers and told the IH dealer what had happened the IH dealer promptly put 706 on Dyno and found it was turning more than it was rated at. We bought the 830 and never regretted it. Later bought one more 830, then CK 830, then CK 930. Later in life I bought a CK 1030 rated at 108 or 110 HP, and the JD dealer where it was at said it would outdo any 4320 they had had in the field with it. Obviously the 1030 had been turned up but I put some hellatious loads on it and it just kept on going. They were not as nice to operate as the JD of the time but they were a workhorse. When all the rear ends were going out of the early IH 806's at about 200 hours we were glad we didn't own one of them. The IH probably looked better than the Cases, but I never thought they were easier to operate.

Had a seed dealer when I was a DSM in Southern Ohio make the statement about his family's JDeeres: "They probably breakdown more often than a Case, They are harder to work on than a Case, They cost more than a Case, They cost more to work on than a Case,..... But they sure drive nice!"

There was a lot of truth to that statement, particularly the last part of it!



Edited by Bill Moyer 8/18/2013 19:20
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)