AgTalk Home
AgTalk Home
Search Forums | Classifieds | Skins | Language
You are logged in as a guest. ( logon | register )

How to plumb a chemical inductor
View previous thread :: View next thread
   Forums List -> Machinery TalkMessage format
 
ScottPA
Posted 3/6/2008 14:07 (#327318)
Subject: How to plumb a chemical inductor



Jersey Shore, PA
Bought a 30 gallon chemical cone to put onto my tender trailer. I'm not sure how it should be plumbed properly in the system. I have 2 big tanks that I draw water from.....they go into my pump/motor then into the sprayer. In the pic below, the motor will be mounted on the side of the trailer right between the tanks, then the hose goes from there to the sprayer. Also what's the best way to set up a rinse line for the cone? Also I saw in other posts a venturi valve mentioned. What exactly does that do and do I need one? I liked all the previous spray tender setups you guys posted.............especially the van trailers. Had some great ideas.

Thanks
Scott



(spraytrl.JPG)



Attachments
----------------
Attachments spraytrl.JPG (81KB - 1663 downloads)
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)