|
SE SD | 46 11 a3 and 44 11 j3 are the two that I have. Makes my snapon set look like made in china cheap junk. http://www.amazon.com/home-improvement/dp/B005EXO3B0
http://www.amazon.com/Retaining-Ring-Plier-Int-0-090/dp/B0078S5ETO
A little expensive but worth it. These two are for a little larger snaprings. I saved a wheel bearing with a big snap ring in to try when I got these. The snapons couldn't get them, the Knipex made it easy. edit I had a Channellock snap ring pliers with the multi tips. Didn't work well at all, best thing I could say about them is that they gave me my money back, which is disappointing cause channellock normally has very good tools. If they have interchangeable tips or work on inside or outside snap rings, they are crap. The fact that these only work on outside or inside rings is what makes them work so well. Makes me want to post a video on you tube showing how well these things work, it's almost unbelievable what a difference a quality tool makes. I've been pulling wrenches for a living for twenty years and am also sick of cheap tools.
Edited by 260 AR 8/8/2013 18:43
| |
|
Snap ring pliers machinery
