|
Clatonia, NE | You will need a GS2, GS3, or FMX to do the mapping. On the 9x70's they run the yield/moisture data through the command console. The command console then sends the info out to a display to record. I believe the cheapest way would be to find a used GS2 and use that along along with you're EZ 500. You will need to get a cable from Ag Express to go from you're EZ 500 to you're GS2 or 3. FMX also has the ability to record the command center data through a Trimble interface cable. The FMX has 2 built-in receivers so you wouldn't need your EZ 500 in the cab. Good luck! | |
|
Is it possible to yield map with an ez_guide 500?
