|
SE Michigan | Dan
I have found that most 30 ft headers are not a full 30 ft. I have a gleaner 30 ft header and I set my width at 28 ft 6 inches. This leaves a small strip on the side that does not cut, but I hardly ever miss any and it is much better than I can drive manually. As for offset for me it is a trial and error method. In most cases it is half of what you think and can be adjusted as you combine and discover it is not quite right.
As for setting for your combine I can not help for exact setting as I have a different combine. It will take some trial and error on some of the settings to get it to function the way you want.
| |
|