|
SW Iowa | biggest negative I would have is trying to line up all those ready-bolts with the many holes drilled in the weight slab, all while you are trying to lift and hold the weight in place.
At least with Deere's and most other tractor company's front end weight system, if you are able to lift the slab, you just "hang" it on the weight carrier, and after hanging the number of slabs you want, then you bolt them together. Lot easier than lineing up all those ready bolt holes, and of course, not to damage the ready threads when you slide each slab together. | |
|
Homemade Tractor Weights (Pic Heavy)
