|
Carter Montana | I haven't actually done it but I think your best bet would be through the General scouting tab. You would be mapping polylines that would become guidance lines in SMS. Do a "Device Setup" export to your mobile unit with your boundaries. use the general logging tab to make however many polylines you need per field and when you sync your project with SMS you will be able to work with the polylines, getting them setup. Depending on what mobile device you use, the GPS may not be as accurate as you need, which is what I found. I had to use a better GPS receiver. Failing that, if you have good boundaries SMS has a powerful tool for building guidance lines.
Edited by mtbrights 6/29/2013 21:09
| |
|
SMS Mobile users....
