|
Butterfield, MN | The one in the manual is the really old version of the node, but the function should still be the same. At least it sounds like you have the right one. Ok, on that one you'll have an orange and white wire going into pin E3 on the left node plug (according to a drawing I have for another kit using an SCS console, so assume that's right), That should get 12 volts on it when you turn on your master switch, and lose it when it gets turned off. If you can trace that down, maybe something is constantly supplying voltage to that wire (assuming through the plugs that you use to tee into the machine harness) that shouldn't be. | |
|
Raven Accuboom won't turn off for waterways,
