|
Butterfield, MN | Hmm, I'm trying to figure out how that would work then too. On those, if the master switch is turned off, it should remove power to all the individual boom switches which would also be on to run. They send current down to the boom/speed node, which tells the rest of the CAN system what is going on. If 12 volts gets removed from the individual boom sense wires going to the boom/speed node, the Accuboom node should turn off all outputs to the boom valves. Sometimes you can have weird stuff happen if you have the Accu-Boom node set to combo node, and it really isn't a combo node. This machine isn't new enough to be using one. | |
|
Raven Accuboom won't turn off for waterways,
