|
SESD | Geez, I don't see the big concern all the others have. How do you pull a heavier bumper trailer with a 2-5/16 ball if it won't fit in the hitch? There isn't that much weight of an empty gooseneck stock trailer on the hitch compared to a loaded down bumper trailer with 7k axels. As long as you can get it up high enough so you don't hit the ground with the front of the trailer, I'd say no prob at all. The DOT may not like it though. Like another poster said, guys pull 2 GN trailers when hauling them to dealers and the back one either has a dolly or some rig made to attach to the trailer in front of it. | |
|
Bumper pulling a gooseneck?
