|
WCNY | Thanks. I would like to have the servo in the spray line, then the on off valve then flow meter. I have a bypass to tank ahead of the boom line with trottle valve.The reason is I have a front mounted tank and a rear mounted pto pump and a three point hitch striptill and I dont have alot of room around the hitch and pump. I would like to mount a removeable mounting plate on the strip till unit that holds the above valve's. Micro Trak recomends mounting the flow valve verticle that is why I would like it last ( not to take up a lot of room). Do you see a problem with this setup?. I would like to change valves easily to a three point drill for starter fert. | |
|
Micro trak spraymate II plumbing issue
