|
Central Ohio | Got any picts of the back shaft setup?
I have been contemplating doing this on our 2 knize 2700 planters. Each is 36 row 20" and individual row clutches gets really expensive.
Right now I use field IQ on both to control the half with clutches. Field IQ switched leads control relays that I setup, like you are hoping to do I think. I used 30 amp auto reset circuit breakers that fit in a spade style fuse holder. works great for us.
Thought about making each planter 6 sections using a shaft across the top of the tool bar or something and then cutting the hex shaft at appropriate places.
Any advice would be helpful | |
|
Planter with 4x trucount electric clutches. blowing fuses. looking for solutions.
