|
Eastern Nebraska | The first thing I would check would be any kind of height switch as Coastal stated. This happened yesterday with a 1990 drill. The switch wasn't getting engaged and was always "down". Next make sure all of your equipment gets current updates. Planter should be version 17, though that planter version (SeedStar 2) could need to be at 10.11 if that's what the planter has. Then make sure display and receiver are up to date. When that's done you can make proper changes to your section control settings.
Edited by PrecisionNE 5/16/2013 10:09
| |
|