Posted 5/10/2013 11:22 (#3090843 - in reply to #3090446) Subject: Re: Jd Command Centre camera wiring (6r series)
plug in the back of the command center:
Pin Number Name Circuit Number
1 Implement CAN Low 905
2 Tractor CAN Low 915
3 Bat. Ground 050
4 Video Signal (+) 1093 (2254)
5 ---- ----
6 Bat. Power 032
7 Video Ground (-) 1090 (2251)
8 ELX 1 (Switched Power) 172
9 Tractor CAN High 914
10 Implement CAN High 904